Centrifugal Fans & Blowers

Centrifugal Fans and Blowers typically have one of six types of wheels that draw the air into the inlet of the blower housing, through the wheel, and discharges it at 90 degrees out through the discharge of the housing.

Induced Draught Fan

Induced Draft (ID) fans are used to create a vacuum or negative air pressure in a system or stack. Our centrifugal blowers are used to maintain elevated ventilation, resulting in increased system efficiency.

Forced Draught Fan

Forced Draft (FD) fans purpose is to provide a positive pressure to a system. This basic concept is used in a wide variety of industries but the term FD Fans is most often found in the boiler industry. Fans for boilers force ambient air into the boiler, typically through a preheater to increase overall boiler efficiency.

Didw (Double Inlet Double Width) Fans

We offer a wide range of DIDW Fans. Designed for high static pressure, the fans offered by us operate at high speed and work in 24 hr duty cycle. Due to their backward curved impellers and blades, these fans are known for their maximum efficiency and low noise levels.

Axial Fans

Axial fans are mainly applied in equipment dedicated to exchange heat through environmental air. Cooling Towers, Air-Cooled Condensers and Air Cooled Heat Exchangers are typical applications.

Roof Ventilators

Roof ventilators made by two kinds of materials high-quality fluorine carbon polyester coating aluminum alloy and 304/2B stainless steel. Roof ventilators have been widely applied in commercial, industrial and civil buildings. There is no need consuming energy and it accords with the policy of energy conservation.

Hot Air Blower

The range of Hot Air Blowers is fabricated using high grade raw material and components. These products are widely used for silicone and platinum coatings in different industries. Robust construction of these blowers and their availability in various technical specifications.

Dust Collector System

We are engaged in providing a superior range of Dust Collectors to our clients, which is made available in various specifications. Widely used in areas such as fast food corners, restaurants, cafés and canteens, our products are known to deliver efficient performance.

Cyclone Separator

Cyclone separators operate on a cyclonic separation principle. Dust-laden air is blown into or drawn through the cyclone and forced to move in a circular motion. The airstream spirals downward to the base of the unit as centrifugal forces move the heavier dust particles to the side walls.

Bag Filter

We take pride in offering a wide range of Bag Filters that are made from quality raw materials in the production process that are tested, and made in accordance with industry specifications and standards.

Rotary Air Lock

This kind of valve is mainly used to create sealing effect between Discharge Hopper and the equipment below the valve.

Scrubber

Scrubber systems are a diverse group of air pollution control devices that can be used to remove particles and/or gases from industrial exhaust streams. Traditionally, scrubbers have referred to pollution control devices that used liquid to "scrub" unwanted pollutants from a gas stream.

Kitchen Exhaust Fan

We service and installation of Ecology Unit, Electrostatic Precipitator and Odour Control Unit for Kitchen Exhaust System. Fabrication of kitchen Equipment Table, Hood, Sink, GI-MS Fabricated products with Powder Coating.

Welcome to BLUE STAR FABRICATION L.L.C.

Our Team of Engineers are
always available to discuss your
requirements & application.
 We under take all kinds of fabrication works :
Ducting –MS/GI/SS/PI ducting fabrication and installation.
General products - Damper, Vcd, Grills, air curtains, filters and sound attenuator (silencers) for blower and we do all kinds of electrical motor rewinding.
BLUE STAR FABRICATION LLC is An Industry Leading Designer And Manufacturer Of High Quality Industrial & Commercial Fans / Marine fans. We Are Extensive Product Line Consist Of Comprehensive Offering Of Centrifugal Fans & Blowers, Induce Draught Fan, Forced Draught Fan, Primary Air Fan, Didw (Double Inlet Double Width) Fans, Axial Fans, Roof Ventilators, Hot Air Blower, Kitchen Exhaust Fan, Cyclone Separator, Dust Collector System, Scrubbers, Bag Filter, Rotary Air Lock.
We provide complete application design, manufacturing testing and site services.
Fans and Blowers aim is to secure customers on a long term working relationship by offering extremely competitively priced products, of the highest quality, delivered on time.